Labconco 9000731 WaterPro PS Polishing Station with Dispensing Gun, UF Life Science Model, <10 ppb TOC, Type 1 Standard, 230V, Schuko Plug

The Labconco 9000731 WaterPro PS-series water purification system has a flexible dispensing gun and produces Type 1 standard water for use with general lab procedures, organic and inorganic analysis, and life science applications. The system uses deionization, carbon filtration, ultrafiltration (UF), and UV irradiation, and requires a deionization resin cartridge, carbon filter kit, and UF membrane (all sold separately). It has a dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water that reduces total organic carbon (TOC) levels to less than 10 parts per billion (ppb). An ultrafiltration membrane removes pyrogens from feed water to less than 0.06 Endotoxin Units (EU)/mL. The unit has a 304 stainless steel front panel and a powder-coated steel cabinet. The LED display shows water resistivity in megohms, water temperature, and timed-dispense setting. The system requires potable water pretreated by reverse osmosis, ion exchange, or distillation. It has an inlet water pressure range of up to 100psi. The system replenishes at up to 1.1 liters per minute (LPM) and the dispensed water has up to 18.2 megohm-cm resistivity. A built-in boost pump recirculates treated water to maintain water purity. It accepts 230V, 50Hz input power and has a Schuko plug for international use. This UF life science model polishing station has a CE mark for compliance with European Economic Area conformity standards.SpecificationsResistance18.2 megohm-cmTotal organic carbon (TOC)Less than 10ppbEndotoxin concentrationLess than 0.06EU/mLPurification typeDeionization, carbon filtration, ultrafiltration (UF), UV oxidationUV lampDual range (185/254nm)Flow rate1.1LPMFeed water pretreatment requirementsPotable water pretreated by reverse osmosis, ion exchange, or distillationFeed water pressure rangeUp to 100psiDisplayLEDInput power230V, 50Hz, 2.5APower plugSchuko, InternationalStandards metCEWeight90lb.Dimensions30.1 x 31.1 x 7.5 inches (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Labconco Corporation manufactures laboratory furniture and equipment such as hoods, ventilated enclosures, and glassware washers for general laboratory use. The company, founded in 1925, is headquartered in Kansas City, MO.

• WaterPro PS-series Type 1 water purification system with water dispensing gun for use with general lab procedures, organic and inorganic analysis, and life science applications
• Requires deionization resin cartridge, carbon filter kit, and ultrafiltration (UF) membrane (all sold separately)
• Dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water and reduction of TOC levels to less than 10 parts per billion (ppb)
• 230V, 50Hz input power with Schuko plug for international use
• CE mark for compliance with European Economic Area conformity standards